Assembling the cage: The quickest way to assemble the quail cages is to use zip ties. Lay down the floor grid ( one with the narrow gauge) on the floor, place the walls around it as shown in the picture. Then use zip ties to fasten all the walls with the floor grid. Then erect the walls and fasten them  with each other.  Then  fasten the roof grid with the walls. Once you have assembled the cage with zip ties you can reinforce it with the “o rings” using O ring pliers.

There are two smaller panels, one with extended bars is door that fits in roof. You will need to bent the extend bar to make a sliding door. Second smaller panel  fits in side wall with wide openings.

Installing the drinkers: The drinkers are not installed inside the cage,  drinkers remain outside the cage,  quails can drink  water from the drinkers  by passing their heads through the grid, attach the drinker according to the picture in the diagram.