Reptile/Bearded Dragon Enclosure 120x60x60 with external thermostat

$480.00

This listing is for a  120 cm wide x 60 cm deep x 60 cm high reptile cage / enclosure with  hinged door. This enclosure comes fitted with a thermostat and 3 ceramic lamp holders with Au plugs.

Please read all contents below before placing order, including delivery and returns term and condition. If you buy the item , you accept these terms and conditions.

Postage cost mentioned is only metro areas, if you live outside metro/ remote areas please contact as at sales@madees.com.au for postage cost.

 

Description

Our reptile cages are made of 1/2 inch thick black extruded PVC. Compared to the MDF compressed wood cages in this style, our units will not degrade with moisture or separate from wood expansion.  This light weight material makes our cages a breeze to move.  This unit weighs a total of 25 kgs. and is very solid! 

Features 
     
3 x Incandescent ceramic light fixture. 100 watt max per socket.

External Thermometer and Hydrometer.

Poly carbonate  sliding door.

Vents in back  for airflow.

External On/Off Switches for both lights.

Assembly required – Approx. 30 min with a Phillips head screwdriver. Cages come flat packed. 
When screwed together the material will form a tight seal, but for extra tight seal on walls it is recommended to apply a bead of silicone to all the wall connections. To avoid damage to surfaces, please use a liner between cage and surface. Excess moisture may saturate panels of cage over time.

Practical and Modern : Our  reptile enclosures are made out of animal safe materials. We use ½” extruded rigid PVC, we use this high quality material because of its sleek matte finish, heat retention qualities and not to mention its non porous so it’s easy to clean up and doesn’t promote bacteria growth like other reptile cages may.

Versatile: Our PVC reptile enclosures can be used for a variety of species depending on their individual needs. All of our PVC reptile cages have been designed to allow either minimal humidity retention or maximum depending on what the keepers goal is, if you are planning on doing a bioactive setup we suggest adding the additional side vents to promote more air flow. Our enclosures are built out of  ½” extruded PVC for its superior heat retention qualities, this great quality will result in needing a lower wattage bulb in your reptile enclosure resulting in energy savings and keeping more of your hard earned money in your pocket. 

Product Specification: 

•    Material: ½” rigid expanded PVC
•    Lightweight closed-cell foam
•    Closed cell surface
•    Matte surface finish, both sides. A matte surface is great for reducing unnecessary stress on         your reptile because they can not see their reflections. 
•    Vibration and sound absorbent
•    Low thermal conductivity (high insulation value)
•    Lightweight
•    Chemical resistant, non-corroding
•    Low water absorption (does not rot)

Please Note Following :-

We don’t recommend ceramic heat emitters because they’re not safe for the animal, they can easily overheat and cause injury to your reptile. Some safer options would be radiant heat panels, basking bulbs or heat projector bulbs.  Our enclosures also insulate very well so you’ll need a much lower wattage bulb than you would in a glass tank. We always recommend using a high quality thermostat to regulate and monitor  temperatures in the enclosures and checking them with an infrared temp gun as well to ensure the proper temps. We also recommend checking over your enclosure and all heating and light sources weekly to ensure they’re all in good condition.

 

General Cage Care:

Don’t stack things on your enclosure; they are not designed to be used as a shelf/table.

Clean with a mild reptile safe soap & lukewarm water, use a soft cloth and rinse well with clean water.

We use diluted F-10 or a water/vinegar mix to clean our personal enclosures.

Rinse the cloth or sponge and change water often when cleaning.

Do not use razor blades, scrapers, squeegees or brushes.

Do not use: Lysol, Pinesol, Formula 409, ammonia, or Windex.

 

Polycarbonate Care:

Clean with a mild reptile safe soap & lukewarm water, use a soft cloth and rinse well with clean water.

Rinse the cloth or sponge and change water often when cleaning.

Never use a dry cloth, or your hand to wipe clean. Always use a clean wet or damp cloth.

DO NOT SCRUB.

Do not use razor blades, scrapers, squeegees or brushes.

Do not use: Lysol, Pinesol, Formula 409, ammonia, or Windex.

Major Delivery Conditions:

Permission to leave – By placing an order with us you agree to have the item/s left at the front door (side door, verandah, etc) in the event that no one is home to sign for and receive the item/s or for any other reason. You also agree to accept the risk this may involve.

  • PO BOX deliveries  – Please DO NOT place an order if you have  a PO Box address. Email us first before ordering to see if we can deliver to P O Box address. Australia Post delivers  to PO boxes but the deliver cost is too high. If you are willing to pay full cost charged by Aust Post, we can arrange delivery for

you.

  • Due to size of item we can not combine multiple items. Please confirm delivery charges for larger quantities  with us , before you buy.
  • Customers have option of arranging their own courier at their expense, please discuss this option with us .

Returns/ Refunds: We accept returns for “change of mind” provided that:

1) Buyer pays for the return postage.

2) Item has not been opened and used.

 

 

 

Additional information

Weight 20 kg
Dimensions 125 × 65 × 20 cm

Reviews

There are no reviews yet.

Be the first to review “Reptile/Bearded Dragon Enclosure 120x60x60 with external thermostat”

Your email address will not be published.